Disconnecting from a Serial Console Using IPMI Serial over LAN (SOL) (SRC CLI)
Only one IPMI SOL connection is allowed per IPMI interface. You can close the active IPMI connection to a local host or a remote host.
To disconnect from a local host using IPMI SOL:
From operational mode, enter the ipmisol close local-session command to close the active IPMI connection to a local host.
Note The ipmisol close local-session command is not supported, if the SRC software is deployed as a virtual machine.
user@host>ipmisol close local-session host
To disconnect from a remote host using IPMI SOL:
From operational mode, enter the ipmisol close remote-session command to close the active IPMI connection to a remote host.
user@host>ipmisol close remote-session host host user userhost—IP address of the remote host IPMI interface.
user—IPMI username configured in the remote host.
For example:
user@host>ipmisol close remote-session host 10.10.10.30 user johndoe