Configuring the Device Models Supported in the Network Element (SRC CLI)
You must configure which device models are supported by the upstream and downstream network elements.
To assign a device model to a network element, you must first configure the device models and the associated dictionaries supported by the SIC group using the shared sic group identifier model id statement. See Configuring the Device Models Supported by the SIC Group (SRC CLI).
Use the following statements to configure the device model:
To configure the device models supported in the network element:
From configuration mode, access the statement that configures the RADIUS network element and specify a name for the network element. This sample procedure uses group1 for the SIC group and ne1 for the downstream network element identifier.user@host# edit shared sic group group1 radius network-element ne1 downstream
Specify a device model. The device model must have previously been configured for the SIC group.[edit shared sic group group1 radius network-element ne1 downstream]user@host# set model model