Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Setting Parameter Values for Services (SRC CLI)

 

Using parameters, you can define general settings in one SRC object and provide specific values for that setting in another object. For example, you can define the general settings for a rate limiter in a policy, insert a parameter for a rate in the policy, and provide specific values for the rate in each service that uses this policy. For information about the concept of parameters, see Parameters and Substitutions.

Use the following configuration statements to configure parameters for services in the global service scope:

Use the following configuration statements to configure parameters for services in a service scope:

To configure parameters for services:

  1. From configuration mode, enter the service parameter configuration. In this sample procedure, the service called Video-Gold is configured in the global service scope.

  2. (Optional) Configure the actual IP address of the gateway router. This value is substituted for the policy global parameter called gateway_ipAddress.

  3. (Optional) Configure the actual IP address of the host(s) that provides the service. This value is substituted for the policy global parameter called service_ipAddress.

  4. (Optional) Configure the actual IP mask for the service. This value is substituted for the policy global parameter called service_ipMask.

  5. (Optional) Configure the actual port for the service. This value is substituted for the policy global parameter called service_port.

  6. (Optional) Configure actual values for other parameters.

  7. (Optional) Configure the quota for the volume of data for service sessions. The SRC software uses this value as the default for service sessions created for this service.

  8. (Optional) Verify your configuration.