Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Configuring the SAE to Manage Routers Acting as a PCEF and Running Junos OS (SRC CLI)

 

To set up the SAE to manage the routers (Services Control Gateways) running Junos OS and acting as a PCEF, configure a Gx router driver that establishes and maintains a connection with the peer.

Use the following configuration statements to configure the SAE to manage the routers (Services Control Gateways) acting as a PCEF:

Note

You can configure the charging information under the [edit shared sae group group-name configuration driver junos-gx] or [edit shared network device] hierarchy. The settings configured under the [edit shared network device] hierarchy override the settings under the [edit shared sae group group-name configuration driver junos-gx] hierarchy.

To configure the SAE to manage the routers (Services Control Gateways) acting as a PCEF:

  1. From configuration mode, access the configuration statement that configures the Gx router driver. In this sample procedure, the Gx driver is configured in the POP-ID group.

  2. Specify the name of the community manager that manages Gx driver communities. Active SAEs are selected from this community.

  3. (Optional) Specify the keepalive timeout till which the SAE waits for a response from the Diameter server before deleting the registered Diameter server entry.

  4. (Optional) Specify the interval between retrying a failed registered Diameter server entry.

  5. (Optional) Specify the time till which the SAE waits for a response from the Diameter server.

  6. (Optional) Specify the timeout before an expected message expires.

  7. (Optional) Configure the session store parameters for the Gx router driver.

    From configuration mode, access the configuration statement that configures the session store for the Gx router driver.

    For more information about configuring session store parameters, see Configuring the Session Store Feature (SRC CLI).

  8. (Optional) Specify the timeout for sending concurrent requests. You can configure a value ranging from 0 through 900 seconds. Default value is 30 seconds.

  9. (Optional) Specify the number of unsolicited requests that can be sent concurrently. You can configure a value ranging from 1 through 500. Default value is 100.

  10. (Optional) Specify whether the user session needs to be removed from the router.

  11. (Optional) Specify the timeout till which the SAE waits for the thread to work before declaring the thread as idle and stopping the thread.

  12. (Optional) Specify the number of working threads that process requests.

  13. (Optional) From configuration mode, access the configuration statements that configure charging information for the Services Control Gateway at group level.

  14. (Optional) Specify the address of the primary online charging system.

  15. (Optional) Specify the address of the secondary online charging system.

  16. (Optional) Specify the address of the primary offline charging system.

  17. (Optional) Specify the address of the secondary offline charging system.

  18. (Optional) Verify your configuration.