Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Configuring Tunnel Interfaces (SRC CLI)

 

You can configure tunnel interfaces to use the redirect server in deployments where a router running JunosE Software does not have a direct connection to the C Series Controller.

Before you configure a tunnel interface, configure the interface on the C Series Controller.

See Configuring Gigabit Ethernet Interfaces for IPv4 (SRC CLI)

Use the following configuration statements to configure tunnel interfaces at the [edit] hierarchy level:

To configure a tunnel interface on a C Series Controller:

  1. From configuration mode, access the configuration statement that configures tunnel interfaces.

    For example:

  2. Configure the type of tunnel.

    or

    or

  3. Specify the IP address of the remote end of the tunnel.

    For example:

  4. (Optional) Specify an IP address that will not change for the local tunnel endpoint. It must be an address on another interface of this host.

    For example:

  5. (Optional) For a GRE tunnel, specify a key.

    For example:

  6. (Optional) Specify an existing physical interface on the C Series Controller.

    For example:

  7. (Optional) Specify the lifetime of tunneled packets.

    For example:

  8. Verify the configuration by running the show command. For example: