Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Configuring Gigabit Ethernet Interfaces for IPv6 (SRC CLI)

 

You can configure the Gigabit Ethernet interfaces to use IPv4 or IPv6 to allow remote access to the C Series Controller. You can specify an IP address with mask or a broadcast address with mask for an interface.

Use the following configuration statement to configure Gigabit Ethernet interfaces to use IPv6 at the [edit] hierarchy level:

To configure a Gigabit Ethernet interface to use IPv6:

  1. From configuration mode, access the configuration statement that configures the interface.

    where unit-number is a number that you can assign for a logical interface identifier.

    For example:

  2. Specify the unit, family, and IP address for the interface.

    For example:

  3. Verify the interface configuration.