Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?


Creating RADIUS Peers (SRC CLI)


RADIUS peers are instances of RADIUS servers. If you define multiple servers, the SAE uses them in cases of failover or as alternate routers for load-balancing purposes.

Each RADIUS plug-in requires a default peer. Configure a RADIUS peer before you configure the plug-in.

RADIUS peers are configured in the peer group for each RADIUS plug-in. Use the following configuration statements to configure a RADIUS peer:

To create a RADIUS peer:

  1. From configuration mode, access the RADIUS peer configuration for the plug-in that you are configuring. In this sample procedure, the RADIUS peer is configured in the west-region SAE group.

  2. Configure the IP address of the RADIUS server to which the SAE sends accounting data.

  3. Configure the port used for RADIUS packets.

  4. Configure the password that is shared with the RADIUS server. You must configure the same password on the RADIUS server.

  5. (Optional) Verify your configuration.