Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Configuring Destination Networks for PTSP Classify-Traffic Conditions (SRC CLI)

 

Use the following configuration statements to add destination networks to a PTSP classify-traffic condition:

To add a destination network to a PTSP classify-traffic condition:

  1. From configuration mode, enter the destination network within a classify-traffic condition. For example:

  2. (Optional) Specify the IP address of the destination network or host.

    Where ip-address is one of the following values:

    • IP address

    • Predefined global parameter:

      • gateway_ipAddress—IP address of the gateway as specified by the service object.

      • interface_ipAddress—IP address of the router interface.

      • service_ipAddress—IP address of the service as specified by the service object.

      • user_ipAddress—IP address of the subscriber.

      • virtual_ipAddress—Virtual portal address of the SAE that is used in redundant redirect server installations.

    • Parameter of type address

  3. (Optional) Configure the IP mask of the destination network or host.

    Where ip-mask is one of the following values:

    • IP address mask

    • Predefined global parameter:

      • interface_ ipMask—IP mask of the router interface.

      • service_ ipMask—IP mask of the service as specified by the service object.

      • user_ ipMask—IP mask of the subscriber.

    • Parameter of type address.

  4. (Optional) Verify your destination network configuration.