Configuring NTP Client Mode for a C Series Controller (SRC CLI)
Use the following configuration statements to configure NTP on a C Series Controller to operate in client mode:
system ntp server address{
version version;
prefer;
}
To configure NTP to operate in client mode:
From configuration mode, access the configuration statement that configures an NTP server, and specify the IP address or hostname of an NTP server.
[edit system ntp]user@host# edit server addressFor example, to specify an NTP server that has an IP address of 192.0.2.30:
[edit system ntp]user@host# edit server 192.0.2.30[edit system ntp server 192.0.2.30]user@host#(Optional) Specify the version of NTP to be used for outgoing packets.
[edit system ntp server address ]user@host# set version version(Optional) If you configure more than one time server, specify whether this server is to be contacted first for synchronization.
[edit system ntp server address ]user@host# set prefer