Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?


Modifying the Subscriber Configuration (SRC CLI)


To locate the CMTS device associated with a subscriber, the JPS maps the subscriber IP address in a message to the CMTS IP address to which the message must be delivered. This mapping specifies the subscriber IP pools associated with CMTS devices.

Use the following configuration statements to configure a CMTS device to which the JPS can connect and the pools of subscriber IP addresses that are managed by the CMTS device:


Tasks to modify subscriber configuration are:

  1.  Configuring Subscriber IP Pools as IP Address Ranges (SRC CLI)

  2.  Configuring Subscriber IP Pools as IP Subnets (SRC CLI)