Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Specifying Connections to CMTS Devices (SRC CLI)

 

Use the following configuration statement to configure the policy server–to–CMTS interface (PKT-MM2) so that the policy server can communicate with CMTS devices:

To configure the policy server–to–CMTS interface:

  1. From configuration mode, access the configuration statement that configures the policy server–to–CMTS interface.

  2. Specify the IP addresses of all the CMTS devices to which the JPS will try to connect.

  3. (Optional) Specify the interval between keepalive messages sent from the COPS client (CMTS device) to the COPS server (the JPS). Changes apply only to COPS connections that are established after you make the change.

    A value of 0 means that no keepalive messages will be exchanged between the CMTS device and the JPS.

  4. (Optional) Specify whether synchronization proceeds when the JPS receives a synchronization request from an application manager (such as the SAE) and the JPS is not connected to a CMTS device to which it should be connected.

  5. (Optional) Specify whether synchronization proceeds when the JPS receives a synchronization request from an application manager (such as the SAE) and the JPS is connected to a pre-PCMM I03 CMTS device.

  6. (Optional) Specify whether synchronization includes both pre-PCMM I03 and PCMM I03 CMTS devices when the JPS receives a synchronization request from an application manager (such as the SAE) and the JPS is connected to a pre-PCMM I03 CMTS device. Relevant only when at least one pre-PCMM I03 CMTS device is connected and sync-despite-pre-i03-pep is specified as true.

  7. (Optional) Specify the source IP address that the JPS uses to communicate with CMTS devices.

    If no value is specified and there is more than one local address, a random local address is used as the source address.

  8. (Optional) Specify the maximum length of incoming messages.

  9. (Optional) Specify the size of message read buffer.

  10. (Optional) Specify the size of message write buffer.

  11. (Optional) Specify the maximum time to wait for the initial PCMM messages to be exchanged after a TCP connection is established.

    The connection is dropped when initial PCMM messages are not exchanged within this time period.

  12. (Optional) Specify the time to wait before the JPS tries to reconnect to CMTS devices.

  13. (Optional) Specify the maximum time to wait for the sent messages to be exchanged after a TCP connection is established.

    This value must be less than the held-decs-max-age and pending-rks-event-max-age values for the corresponding RKS interface.

  14. (Optional) Specify whether to validate PCMM objects received from PDPs.

  15. (Optional) Verify your configuration.