SSR Cluster Planning Worksheets
Use the worksheet shown in Table 1 to plan your SSR Starter Kit cluster. The worksheet allows you to record IP addresses and node IDs for the four C Series Controllers. Record the node IDs after the SRC software has assigned them. If you use more nodes, see the worksheet in Table 2 for the Expansion Kit.
Table 1: SSR Starter Kit Cluster Worksheet
Nodes and Hosted Components | Node IP Address | Bonded IP Address | Node ID Assigned to Component |
|---|---|---|---|
Client node hosting:
| |||
Client node hosting:
| |||
Data node hosting:
| |||
Data node hosting:
|
A cluster can include either two or four data nodes, up to three management servers and up to twenty-four client nodes, each hosting SSR client components such as the SIC, SAE and so on. The worksheet in Table 2 provides locations for you to record the IP addresses and node IDs for this maximum configuration.
Table 2: Expanded SSR Cluster Planning Worksheet
Product Name | Nodes and Hosted Components | Node IP Address | Bonded IP Address | Node ID Assigned to Component |
|---|---|---|---|---|
Data Node Expansion Kit | Data node hosting:
| |||
Data node hosting:
| ||||
Management Server Expansion Kit | Management server component | |||
Additional client nodes
| Client node hosting:
| |||
Client node hosting:
| ||||
Client node hosting:
| ||||
Client node hosting:
| ||||
Client node hosting:
| ||||
Client node hosting:
| ||||
Client node hosting:
| ||||
Client node hosting:
| ||||
Client node hosting:
| ||||
Client node hosting:
| ||||
Client node hosting:
| ||||
Client node hosting:
| ||||
Client node hosting:
| ||||
Client node hosting:
| ||||
Client node hosting:
| ||||
Client node hosting:
| ||||
Client node hosting:
| ||||
Client node hosting:
| ||||
Client node hosting:
| ||||
Client node hosting:
| ||||
Client node hosting:
| ||||
Client node hosting:
|