Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Powering the Local Controller On and Off Using IPMI (SRC CLI)

 

You can power on or off, and reset the C Series Controller you are currently logged in to.

To execute a power command in the local controller using IPMI:

  1. Log in to the C Series Controller.
  2. Enter the request ipmi power command.Note

    The request ipmi power command is not supported, if the SRC software is deployed as a virtual machine.

    • on—Power on a C Series Controller.

    • off—Power off a C Series Controller. This command does not initiate a clean shutdown of the operating system before powering off the system.

    • soft-off—Power off a C Series Controller softly. This command initiates a soft shutdown of the operating system before powering off the system.

    • reset—Perform a hard reset on a C Series Controller.

    • cycle—Power off and then power on a C Series Controller.

    For example: