Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Configuring a Login Class (SRC CLI)

 

Use the following configuration statements to configure login classes at the [edit] hierarchy level:

To configure a login class:

  1. From configuration mode, access the configuration statement that configures login classes, and assign a name to the login class.

  2. Specify the permissions for the login class.

    For example, the following statement specifies that the user-account class can configure and view only user accounts:

    The following statement specifies that the network-mgmt class can configure and view only SNMP parameters:

  3. (Optional) Configure access to specified operational mode commands that would otherwise be denied.

    For example, the following statement specifies that the network-mgmt class can install system software:

  4. (Optional) Deny access to specified operational mode commands that would otherwise be allowed.

    For example, the following statement specifies that the remote class cannot connect to the SRC software through SFTP:

  5. (Optional) Configure access to specified configuration mode commands that would otherwise be denied.

    For example, the following statement specifies that the network-mgmt class can issue configuration mode commands at the [routing-options] hierarchy level:

  6. (Optional) Deny access to specified configuration mode commands that would otherwise be allowed.

    For example, the following statement specifies that the network-mgmt class does not have access to the [snmp address] hierarchy level:

  7. Specify the number of minutes that a session can be idle before it is automatically closed.

  8. Display the results of the configuration.