Starting the SRC SNMP Agent (C-Web Interface)
You must configure the SNMP agent and then manually start the agent. If you attempt to manually start the SNMP agent before it is configured, the software displays a message that the agent has not been configured and cannot start.
The SNMP agent automatically restarts in the event of a host reboot or process failure that stops the agent.
Before you start the SRC SNMP agent:
Perform the initial configuration tasks on the C Series Controller.
Configure the SRC SNMP agent.
Manually start the SRC SNMP agent the first time it runs. Thereafter, the agent automatically restarts.
To start the SNMP agent:
From the Component box, select agent.
The system responds with a start message. If the SNMP agent is already running, the system responds with a warning message indicating that fact.