Starting the SRC Client on a JunosE Router
JunosE routers use an SRC client to interact with the SAE. See JunosE Broadband Access Configuration Guide for complete information about configuring the SRC client on a JunosE router.
To start the SRC client:
Access the router CLI.
Access Global configuration mode.
host1# configure terminalSwitch to the virtual router for which you want to create an SRC client.
host1(config)#virtual-router <vrName>Enable the SRC client.
To enable COPS-PR mode:
host1:<vrName>(config)#sscc enable cops-prTo enable COPS-XDR mode:
host1:<vrName>(config)#sscc enableSet the primary address from the configuration directory.
host1:<vrName>(config)#sscc primary address <ipAddress> port 3288