Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?


Creating and Configuring an SRC VTA Shared Group Configuration (SRC CLI)


You can set up multiple SRC VTAs; each SRC VTA is configured as a separate group with its own shared configuration.

Use the following statements to configure an SRC VTA shared configuration:

To configure an SRC VTA shared configuration:

  1. From configuration mode, access the statement that configures an SRC VTA shared group configuration. For example, to configure an SRC VTA group called vta1:

  2. Specify the subscriber-id-solution option. This option specifies a data key that uniquely identifies subscriber accounts and sessions in the external database. Some settings also provide information that the NIC and the SAE use to identify subscribers.

    For more information about configuring the subscriber-id-solution option, see Keys Used to Specify the Subscriber ID Solution (SRC CLI).

  3. Specify the location of the NIC proxy configuration relative to the configuration properties for the SRC VTA.

    Set this option to the name you configured under the [edit shared vta nic-proxy-configuration name] configuration statement. See Configuring NIC Proxies for the SRC VTA.

    If you are using a NIC to map subscriber identifiers to an SAE, and you select an SRC VTA subscriber ID value that provides a data key for the NIC, specify the NIC proxy that uses that data key.

  4. Verify your configuration.

  5. Commit your configuration.


You must enable the new SRC VTA instance with the enable component vta-name command.