Removing a Management Server from an Active SSR Cluster
This procedure makes the following assumptions:
You are working with an active cluster and the SSR database is in production mode. If you are unsure what mode the database is in, see Viewing the SSR Database Mode (SRC CLI).
The client node that is hosting the management server is installed, configured and active, and you want it to remain in the cluster as a client node only.
This procedure requires you to restart the component database on all management servers in the cluster, which is a disruptive process. This procedure should be performed only during a maintenance window. Review this procedure in full before proceeding.
To remove a management server from a client node in an active cluster:
Select the client node from which you want to remove the management server, and reconfigure the node as a client node without a management server.
Commit the configuration.
Place the database into maintenance mode.
Disable the component database on all management servers in the cluster (one by one).
Enable the component database on all management servers in the cluster (one by one).
Verify the cluster configuration changes by viewing the status of the database.
Place the database into production mode.