Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Configuring the License Server Repository (SRC CLI)

 

You can use the license server repository configuration to configure access to the Juniper Networks database for the license server.

Use the following configuration statements to configure the license server repository:

Note

In most cases, you do not need to change the configuration for the license server. If you change the configuration, do so with care. The software needs to be able to communicate with the license server to operate correctly.

To configure the license server repository:

  1. From configuration mode, access the configuration statement that configures the license server repository.

  2. Specify the IP address or the hostname of the LDAP server that stores licensing data.

    Note

    This is a required property. If no value is assigned, the license server does not start. If this value is removed while the license server is running, the server rejects licensing requests. After a new value is entered and the license server connects to the LDAP server, the license server accepts license requests again.

  3. Specify the port number of the LDAP server that stores licensing data.

  4. Specify the base directory of the LDAP server that stores licensing data.

  5. Specify the DN used by the SAE to authenticate access to the LDAP server that stores licensing data.

  6. Specify the password used to authenticate access to the LDAP server that stores licensing data.