Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Configuring the Test Environment for IMS Services (SRC CLI)

 

Configuring the settings for your test environment is optional. You can choose to configure the test settings and specify changes to the test settings.

Configuring Settings for AAR Messages (SRC CLI)

Use the following command to configure the AA-Request (AAR) test message:

To configure the AAR message for the test environment:

  1. From configuration mode, access the statement that configures the AAR message template with your settings.
  2. Specify the Diameter identifier for the endpoint that is the originator of the Diameter message.
  3. Specify the Diameter identifier for the realm of the endpoint that is the originator of the Diameter message.
  4. (Optional) Specify the charging identifier for the application function (AF).
  5. (Optional) Specify the timeout for the authorization.
  6. (Optional) Specify the username.
  7. (Optional) Specify the events for which notification is requested. If you do not configure this test setting, you must specify a value when testing service activations.

    where

    • indication-of-bearer-release—Provides notification of a bearer’s removal

    • indication-of-subscriber-detachment—Provides notification of the subscriber detachment

Configuring the Globally Unique Address (SRC CLI)

Use the following command to configure the globally unique address for the AAR test message:

To configure the globally unique address for the test environment:

  1. From configuration mode, access the statement that configures the AAR message template with your settings.
  2. (Optional) Specify the IPv4 address or the fully qualified domain name for the endpoint that is the originator of the Diameter message. If you do not configure this test setting, you must specify a value when testing service activations.

Configuring Service Information for Media Types (SRC CLI)

Use the following command to configure the service information that is used to determine QoS requirements for the media type:

To configure the media component for the test environment:

  1. From configuration mode, access the statement that configures the AAR message template with your settings. Specify the appropriate media component number.
  2. Specify the service name.
  3. (Optional) Specify the media type.
  4. (Optional) Specify the maximum download bandwidth requested.
  5. (Optional) Specify the maximum upload bandwidth requested.
  6. (Optional) Specify the action taken for the AAR.

    where

    • enabled—Commits resource reservation in both directions

    • removed—Releases all resources associated with the corresponding resource reservation

Configuring IP Flows for Media Types (SRC CLI)

Use the following command to configure the QoS and filters for the IP flows:

To configure the media subcomponent for the test environment:

  1. From configuration mode, access the statement that configures the AAR message template with your settings. Specify the appropriate flow number. These configuration settings override the media type settings.
  2. Define the packet filter for the flow. The flow description AVP contains the classifier (or filter) information.

    The syntax of this AVP has the following restrictions:

    • Only permit action should be used as action.

    • No options should be used.

    A subcomponent may include up to two flow descriptions (uplink and downlink), including:

    • Direction (in—uplink, or out—downlink)

    • Source IP address

    • Destination IP address

    • Source port

    • Destination port

    • Protocol

  3. (Optional) Specify the maximum download bandwidth requested.
  4. (Optional) Specify the maximum upload bandwidth requested.