Configuring the Local Diameter Peer (SRC CLI)
Use the following configuration statements to configure the local Diameter peer:
slot number ims aracf-rq {
protocol protocol;
port port;
address address;
origin-host origin-host;
origin-realm origin-realm;
}
To configure the local Diameter peer:
From configuration mode, access the statement that configures the Diameter peer.
user@host# edit slot 0 ims aracf-rq(Optional) Specify the protocol used for the transport layer.
[edit slot 0 ims aracf-rq]user@host# set protocol protocol(Optional) Specify the port used for incoming connections.
[edit slot 0 ims aracf-rq]user@host# set port port(Optional) Specify the IP address of the local peer.
[edit slot 0 ims aracf-rq]user@host# set address address(Optional) Specify the Diameter identifier for the local endpoint that is the originator of the Diameter message.
[edit slot 0 ims aracf-rq]user@host# set origin-host origin-host(Optional) Specify the Diameter identifier for the realm of the local endpoint that is the originator of the Diameter message.
[edit slot 0 ims aracf-rq]user@host# set origin-realm origin-realm(Optional) Verify your configuration.
[edit slot 0 ims aracf-rq] user@host# show protocol tcp; port 3868; address 127.0.0.1; origin-host testserver; origin-realm testrealm; peer 1 { address 127.0.0.1; origin-host testclient; }