Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Adding Routers Individually (SRC CLI)

 

Use the following configuration statements to add a router:

To add a router:

  1. From configuration mode, access the configuration statements that configure network devices. This procedure uses junose_boston as the name of the router.

    The same procedure can be used for routers running Junos OS.

  2. (Optional) Disable the accounting-per-attachment feature to calculate accounting for each policy list on the basis of the accounting flag status of each policy rule in the policy list.

    Note
    • To enable the accounting-per-attachment feature, configure the accounting-per-attachment option at the [edit shared network device] hierarchy.

    • By default, the accounting-per-attachment feature is not set.

    • You must restart the sscc connection for the configuration changes to take effect.

    • You can configure the accounting-per-attachment feature under the [edit shared sae group group-name configuration driver junose] or [edit shared network device] hierarchy. The settings configured under the [edit shared network device] hierarchy override the settings under the [edit shared sae group group-name configuration driver junose] hierarchy.

  3. (Optional) Add a description for the router.

  4. (Optional) Add the IP address of the router.

  5. (Optional) Specify the type of device that you are adding.

  6. (Optional) Specify quality of service (QoS) profiles that are configured on the router.

  7. (Optional) Verify your configuration.