Specifying Initialization Scripts on the SAE (SRC CLI)
Use the following configuration statements to specify initialization scripts for third-party devices:
shared sae configuration driver scripts {
extension-path extension-path;
general general;
third-party third-party;
}
To configure initialization scripts for third-party devices:
- From configuration mode, access the configuration statements
that configure initialization scripts. In this sample procedure, the
scripts are configured in the west-region group.user@host# edit shared sae group west-region configuration driver scripts
- Specify the initialization script for third-party devices.[edit shared sae group west-region configuration driver scripts]user@host# set third-party third-party
SAE runs the specified script when the third-party device driver is activated and again when the driver is deactivated.
- Specify the initialization script that can be used for
all other types of routers supported by the SRC module.[edit shared sae group west-region configuration driver scripts]user@host# set general general
- Configure a path to scripts that are not in the default
location, /opt/UMC/sae/lib.[edit shared sae group west-region configuration driver scripts]user@host# set extension-path extension-path
- (Optional) From operational mode, verify your initialization
script configuration.
[edit shared sae group west-region configuration driver scripts] user@host# show third-party iorPublisher;