Configuring General Properties for the Redirect Server (SRC CLI)
Use the following configuration statements to configure general properties for the redirect server:
To configure properties for the redirect server:
From configuration mode, access the configuration statement that configures the redirect server.
user@host# edit redirect-serverSpecify the URL to which to send subscriber traffic.
[edit redirect-server]user@host# set destination-url destination-url(Optional) Specify the TCP port on which the redirect server runs. If you do not specify a TCP port, the redirect server runs on the port 8800.
[edit redirect-server]user@host# set tcp-port tcp-port(Optional) Specify whether the redirect server sends an HTTP 200 OK response with an HTML document that includes the <HTTP-Equiv="Refresh"> header to a subscriber’s browser in response to a captured request.
[edit redirect-server]user@host# set refreshIf you do not use the refresh option, the redirect server sends an HTTP 302 Found response to a subscriber’s browser in response to a captured request.
By setting the refresh option, the load on the Web server is decreased because non-browser (or non-HTML) client applications that use HTTP do not follow this refresh message; however, most client applications do follow HTTP 302 messages.
To configure IPv6 general properties for the redirect server:
From configuration mode, access the configuration statement that configures the IPv6 general properties for the redirect server.
user@host# edit redirect-server ipv6-redirect(Optional) Specify the TCP port on which the redirect server runs. If you do not specify a TCP port, the redirect server runs on the port 8900.
[edit redirect-server ipv6-redirect]user@host# set tcp-port tcp-port