Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Configuring TCP Conditions for PTSP Classify-Traffic Conditions (SRC CLI)

 

Use the following configuration statements to add TCP conditions to a PTSP classify-traffic condition:

Because the protocol is already set to TCP, do not change the protocol or protocol-operation options.

To add TCP conditions to a PTSP classify-traffic condition:

  1. From configuration mode, enter the TCP configuration. For example:

  2. (Optional) Enter the protocol for the TCP configuration.

    For PTSP this is set to TCP.

  3. (Optional) Enter the destination port configuration for the TCP configuration.

  4. (Optional) Configure the destination port.

    Where from-port is one of the following values:

    • service_port—A predefined global parameter that is the port of the service as specified by the service object.

    • Integer in the range 0–65535.

    • Expression—A range of port numbers; for example, 10..20.

    • Parameter of type port.

    Use a range of ports to specify port numbers that are greater than or less than a specified port number. For example:

    • To set a range of ports that is greater than 10, use 11..65535.

    • To set a range of ports that is less than 200, use 0..199.

  5. (Optional) Enter the source port configuration for the TCP configuration.

  6. (Optional) Configure the source port.

    Where from-port is one of the following values:

    • service_port—A predefined global parameter that is the port of the service as specified by the service object.

    • Integer in the range 0–65535

    • Expression—A range of port numbers; for example, 10..20.

    • Parameter of type port

    Use a range of ports to specify port numbers that are greater than or less than a specified port number. For example:

    • To set a range of ports that is greater than 10, use 11..65535.

    • To set a range of ports that is less than 200, use 0..199.

  7. (Optional) Verify the TCP condition configuration.