Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Configuring Protocol Conditions with Ports for PTSP Classify-Traffic Conditions (SRC CLI)

 

Use the following configuration statements to add general protocol conditions with ports to a PTSP classify-traffic condition:

To add general protocol conditions with ports to a PTSP classify-traffic condition:

  1. From configuration mode, enter the protocol port condition configuration. For example:

  2. Configure the protocol matched by this classify-traffic condition.

    UDP is the only valid value for PTSP.

  3. (Optional) Enter the destination port configuration for the protocol port configuration.

  4. (Optional) Configure the destination port.

    Where from-port is one of the following values:

    • service_port—A predefined global parameter that is the port of the service as specified by the service object

    • Integer in the range 0–65535

    • Expression—A range of port numbers; for example, 10..20

    • Parameter of type port

    Use a range of ports to specify port numbers that are greater than or less than a specified port number. For example:

    • To set a range of ports that is greater than 10, use 11..65535.

    • To set a range of ports that is less than 200, use 0..199.

  5. (Optional) Enter the source port configuration for the protocol port configuration.

  6. (Optional) Configure the source port.

    Where from-port is one of the following values:

    • service_port—A predefined global parameter that is the port of the service as specified by the service object.

    • Integer in the range 0–65535

    • Expression—A range of port numbers; for example, 10..20.

    • Parameter of type port

    Use a range of ports to specify port numbers that are greater than or less than a specified port number. For example:

    • To set a range of ports that is greater than 10, use 11..65535.

    • To set a range of ports that is less than 200, use 0..199.

  7. (Optional) Verify your protocol condition configuration.