Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Configuring Protocol Conditions (SRC CLI)

 

The procedure in this sections shows how to configure general protocol conditions.

Use the following configuration statements to add general protocol conditions to a classify-traffic condition:

To add general protocol conditions to a classify-traffic condition:

  1. From configuration mode, enter the general protocol condition configuration. For example:

  2. Configure the protocol matched by this classify-traffic condition.

  3. Configure the policy to match packets with the protocol that is either equal or not equal to the specified protocol.

  4. (Optional) Configure the value of the IP flags field in the IP header.

  5. (Optional) Configure the mask that is associated with the IP flag.

  6. (Optional) Configure the value of the fragment offset field.

  7. (Optional) Configure the packet length on which to match. The length refers only to the IP packet, including the packet header, and does not include any layer 2 encapsulation overhead.

  8. (Optional) Verify your protocol condition configuration.