Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Configuring Network Interfaces in the Directory for the Edge Network

 

You must add network interfaces to the directory. For the edge network, you do so by specifying the network interfaces of the routers and the switches in the access network between subscribers and the SRC network.

Use the following configuration statements to configure a network interface:

To configure the network interfaces of the routers and the switches in the access network:

  1. From configuration mode, access the configuration statement that configures network interfaces.

    Enter the name of the network device.

  2. (Optional) Specify a description for the network device.

  3. Specify the network interface.

    Enter the name of the virtual router.

  4. (Optional) Specify the provisioned bandwidth for the network interface.

  5. (Optional) Specify the background bandwidth for the network interface.

    For information about background bandwidths, see Allocating Bandwidth to Applications Not Controlled by SRC ACP.

  6. (Optional) Specify whether SRC ACP detects the link rate for the network interface.

    If you set this option, specify portId as an index key when configuring SRC ACP operations so that updated sync rates are provided from interface tracking events. If the sync rate is not available, then the provisioned bandwidth configured in the subscriber profile is used.

  7. (Optional) Verify your configuration.