Before You Configure the Redirect Server on a C Series Controller
Before you configure the redirect server on a C Series Controller:
Configure the connection between the redirect server and the JunosE router by configuring policies on the C Series Controller:
Configure and enable the HTTP local server on the JunosE router
On the C Series Controller, configure a policy that includes the following policy actions to define which traffic to send to the redirect server:
An exception action to specify that an HTTP application receive traffic.
An http redirect policy action to specify the URL to receive packets identified in the exception application action.
Alternatively, if the distance between the JunosE routers and the C Series Controller is one hop away, you can configure a next-hop policy on the JunosE router that specifies a destination address that is the virtual IP address of the active redirect server rather than configuring an SRC policy.
If you plan to configure a redundant redirect server, make sure that you are familiar with the network configuration required.