Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Setting Up SAE Communities (SRC CLI)

 

Tasks to configure SAE communities are:

Note

If there is a firewall in the network, configure the firewall to allow SAE messages through.

Configuring the SAE Community Manager

Use the following configuration statements to configure the SAE community manager that manages third-party network device communities:

To configure the community manager:

  1. From configuration mode, access the configuration statements for the community manager. In this sample procedure, sae_mgr is the name of the community manager.

  2. Specify the interval between keepalive messages sent from the active SAE to the passive members of the community.

  3. Specify the number of threads that are allocated to manage the community. You generally do not need to change this value.

  4. Specify the amount of time an SAE waits for a remote member of the community when it is acquiring a distributed lock. You generally do not need to change this value.

  5. Specify the amount of time that an active SAE must wait after it shuts down before it can try to become the active SAE of the community again.

  6. (Optional) Verify the configuration of the SAE community manager.

Specifying the Community Manager in the SAE Device Driver

Use the following configuration statements to specify the community manager in the SAE device driver.

To specify the community manager:

  1. From configuration mode, access the configuration statements for the third-party device driver.

  2. Specify the name of the community manager.

  3. (Optional) Verify the configuration of the third-party device driver.