Specifying JunosE Router Initialization Scripts on the SAE (SRC CLI)
Use the following configuration statements to specify router initialization scripts for JunosE routers:
To configure router initialization scripts for JunosE routers:
From configuration mode, access the configuration statements that configure router initialization scripts. In this sample procedure, the scripts are configured in the west-region group.
user@host# edit shared sae group west-region configuration driver scriptsSpecify the script for JunosE routers when the JunosE driver uses COPS-PR mode when connecting to the SAE.
[edit shared sae group west-region configuration driver scripts]user@host# set junose junoseSpecify the script for JunosE routers when the JunosE driver uses COPS-XDR mode when connecting to the SAE.
[edit shared sae group west-region configuration driver scripts]user@host# set junose-xdr junose-xdrIn COPS-XDR mode, the router does not send the network access server (NAS) IP address to the SAE. If your configuration requires this value, add the following line to a JunosE script:
import ERXnasipConfigure a router initialization script that can be used for all types of routers that the SRC module supports.
[edit shared sae group west-region configuration driver scripts]user@host# set general generalConfigure a path to router initialization scripts that are not in the default location, /opt/UMC/sae/lib.
[edit shared sae group west-region configuration driver scripts]user@host# set extension-path extension-path(Optional) Verify your router initialization script configuration.
[edit shared sae group west-region configuration driver scripts] user@host# show junose-xdr poolPublisher;