Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Configuring System Information for the SRC SNMP Agent (SRC CLI)

 

Use the following configuration statements to configure information supplied by the SRC SNMP agent:

To configure properties for the SRC SNMP agent:

  1. From configuration mode, access the configuration statement that configures the SRC SNMP agent.

  2. (Optional) Specify the administrative contact for the system being managed by SNMP.

  3. (Optional) Specify the name of the system being managed by SNMP.

  4. (Optional) Specify the location of the system being managed by SNMP.

  5. (Optional) Specify the description of the system being managed by SNMP.

  6. (Optional) Specify the listening address on which to receive incoming SNMP requests.

    To list more than one IP address, enter the addresses separated by spaces within brackets. By default, the SRC SNMP agent listens on all IPv4 interfaces.

  7. (Optional) Verify your configuration.

    If you did not configure the SNMP agent, the command displays only the SRC SNMP agent configuration.