Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Managing the SRC 3GPP Gateway (SRC CLI)

 

After you have configured the SRC 3GPP gateway, you can perform these tasks:

Starting the SRC 3GPP Gateway (SRC CLI)

To start the SRC 3GPP gateway:

user@host> enable component gw-3gpp

The system responds with a start message. If the SRC 3GPP gateway is already running, the system responds with a warning message.

Restarting the SRC 3GPP Gateway (SRC CLI)

You must restart the SRC 3GPP gateway after you commit a configuration change.

To restart the SRC 3GPP gateway:

user@host> restart component gw-3gpp

The system responds with a start message. If the SRC 3GPP gateway is already running, the system responds with a shutdown message and then a start message.

Stopping the SRC 3GPP Gateway (SRC CLI)

To stop the SRC 3GPP gateway:

user@host> disable component gw-3gpp

The system responds with a shutdown message. If SRC 3GPP gateway is not running when you issue the command, the system responds with the command prompt.