Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Configuring the SAE for IMS


You must configure the SAE to recognize IMS by adding information about IMS to the SAE properties. Tasks for configuring the SAE for IMS are:

Configuring IMS as an External Plug-In

To configure an external plug-in for the SAE:

  1. From configuration mode, access the statement that configures the external plug-ins.

  2. Configure the object reference of the external plug-in that is exported to the SAE.

    where corba-object-reference is one of the following references:

    • Path to the interoperable object reference (IOR) file in the format file:///opt/UMC/ims/var/run/ims.ior

    • The corbaloc URL in the format corbaloc::host:9801/ASGIMS where host is the IP address of the C Series Controller or

    • Common Object Services (COS) in the format corbaname::host:2809#ASGIMS/statesync/hostname or corbaname::host:2809/NameService#ASGIMS/statesync/hostname where

      • host is the IP address of the C Series Controller

      • hostname is the hostname of the C Series Controller

  3. Specify the plug-in attributes.

    Attributes for IMS are service-name, service-session-name, router-name, login-name, terminate-cause, property.

    For more information about configuring plug-in attributes, see Configuring the SAE for External Plug-Ins (SRC CLI).

Configuring Event Publishers

You must configure the SAE to publish the global service tracking events to the IMS. Any other events are ignored.

For information about configuring event publishers, see Special Types of Event Publishers.