Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
Viewing the Power Status of a Remote Controller Using IPMI (SRC CLI)
Purpose
To display the power status (on or off) of a remote controller using IPMI.
 | Note: The show ipmi host power command is not supported, if the SRC software is deployed as a virtual machine. |
Action
- Log in to the C Series Controller.
- Enter the show ipmi host power command.user@host>show ipmi host host user user power
- host—IP address of the remote host IPMI interface.
- user—IPMI username configured in the remote host.
For example:
user@host>show ipmi host 10.10.10.30 user johndoe power
