Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Configuring Event Traps (SRC CLI)

    Use the following configuration statements to configure event traps:

    snmp notify event category category-name ...snmp notify event category category-name event event-name ...

    Note: The systemOperatingFailure and diskFailure traps are not supported in the virtualized SRC software. Hence, you cannot commit the SRC configurations in the virtualized SRC software if these hardware-related traps are set. If you load trap configurations through the LDIF file in the virtualized SRC software, you must delete these traps after loading the trap configurations.

    To configure event traps:

    1. From configuration mode, access the configuration statement that configures the type of event trap.
      [edit]user@host# edit snmp notify
    2. Specify the type of trap and the trap name.
      [edit snmp notify] user@host# set event category category-name event event-name

      You can select from the list of trap types and their associated traps or create new traps.

    Modified: 2016-12-29