Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Configuring SNMP Chassis Alarms (SRC CLI)

    To configure SNMP chassis alarms:

    Note: The chassis alarm is not supported in the virtualized SRC software. Hence, you cannot commit the SRC configurations in the virtualized SRC software if the chassis alarm is enabled.

    1. Set the editing level for the CLI to expert.
      user@host> set cli level expert
    2. From configuration mode, access the configuration statement that configures the chassis alarms.
      [edit]user@host# edit snmp monitor chassis-alarm
    3. (Optional) Disable all chassis alarms. You cannot delete the chassis alarms.
      [edit snmp monitor chassis-alarm]user@host# set disable
    4. (Optional) Specify the number of seconds between which SNMP samples the value of an object. For example:
      [edit snmp monitor chassis-alarm]user@host# set interval 60

    Modified: 2017-05-02