Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
Configuring Authentication for SNMPv3 Users (SRC CLI)
For SNMPv3 users, you can configure the authentication type and the password used for authentication. The type of authentication can be Message Digest 5 (MD5) or Secure Hash Algorithm (SHA). By default, authentication is not configured for SNMPv3 users.
To configure authentication for SNMPv3 users:
- From configuration mode, access the configuration statement
that configures the authentication type.
To configure MD5 authentication:
[edit]user@host# set snmp v3 usm local-engine user username authentication-md5To configure SHA authentication:
[edit] user@host# set snmp v3 usm local-engine user username authentication-sha - Specify the authentication password.
To configure authentication password for MD5:
[edit] user@host# set snmp v3 usm local-engine user username authentication-md5 authentication-passwordTo configure authentication password for SHA:
[edit] user@host# set snmp v3 usm local-engine user username authentication-sha authentication-passwordThe password must contain at least eight characters.
