Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Configuring the SAE to Manage Network Devices (SRC CLI)

    Use the following configuration statements to configure the device driver for MX Series routers:

    shared sae configuration driver junos-ise { sae-community-manager sae-community-manager;pool-retrieval;sync-from-sessionstore;ignore-framed-ip-netmask;cached-driver-expiration cached-driver-expiration;concurrent-post-sync-jobs concurrent-post-sync-jobs;concurrent-request-timeout concurrent-request-timeout;concurrent-requests concurrent-requests ;enable-disconnect-ontimeout;delay-service-policy-provisioning delay-service-policy-provisioningkeep-alive-timeout keep-alive-timeout;pending-acrs-strs-wait-time pending-acrs-strs-wait-time;registry-retry-interval registry-retry-interval;reply-timeout reply-timeout;sequential-message-timeout sequential-message-timeout;sync-count-wait-timeout sync-count-wait-timeout;thread-pool-size thread-pool-size;thread-idle-timeout thread-idle-timeout;}

    To configure the device driver:

    1. From configuration mode, access the statements for the device driver.
      user@host# edit shared sae configuration driver junos-ise
    2. Specify the name of the community manager.
      [edit shared sae configuration driver junos-ise] user@host# set sae-community-manager sae-community-manager
    3. (Optional) Specify the pool retrieval option.
      [edit shared sae configuration driver junos-ise] user@host# set pool-retrieval
    4. (Optional) Specify whether the SAE should be synchronized from the session store.
      [edit shared sae group POP-ID configuration driver junos-ise]user@host# set sync-from-sessionstore
    5. (Optional) Specify whether to ignore the Framed-IP-Mask AVP and allow IP-based filtering without considering the framed IP netmask.
      [edit shared sae group POP-ID configuration driver junos-ise]user@host# set ignore-framed-ip-netmask
    6. (Optional) Specify the number of jobs that can be processed concurrently to log in to subscriber sessions that are incomplete after synchronizing state with the router. You can configure a value ranging from 10 through 50. Default value is 20.
      [edit shared sae configuration driver junos-ise] user@host# set concurrent-post-sync-jobs concurrent-post-sync-jobs
    7. (Optional) Specify the timeout for sending concurrent requests. You can configure a value ranging from 0 through 900 seconds. Default value is 30 seconds.
      [edit shared sae configuration driver junos-ise] user@host# set concurrent-request-timeout concurrent-request-timeout
    8. (Optional) Specify the number of unsolicited requests that can be sent concurrently. You can configure a value ranging from 1 through 500. Default value is 100.
      [edit shared sae configuration driver junos-ise] user@host# set concurrent-requests concurrent-requests
    9. (Optional) Specify whether the user session needs to be removed from the router.
      [edit shared sae configuration driver junos-ise] user@host# set enable-disconnect-ontimeout
    10. (Optional) Specify the amount of time by which scheduler tasks are delayed after the user login is completed. You can configure a value ranging from 0 through 1000 milliseconds. Default value is 0.
      [edit shared sae configuration driver junos-ise] user@host# set delay-service-policy-provisioning delay-service-policy-provisioning
    11. (Optional) Specify the minimum amount of time to keep the state of a device driver after its Diameter connection is closed.
      [edit shared sae configuration driver junos-ise] user@host# set cached-driver-expiration cached-driver-expiration
    12. (Optional) Specify the keepalive timeout before the registry to a Diameter server expires.
      [edit shared sae configuration driver junos-ise] user@host# set keep-alive-timeout keep-alive-timeout
    13. (Optional) Specify the maximum time that the device driver waits for completing sessions restoration to start processing pending Accounting-Request (ACR) and Session-Termination-Request (STR) messages. You can configure a value ranging from 600 through 18000 seconds. Default value is 3600 seconds.
      [edit shared sae configuration driver junos-ise] user@host# set pending-acrs-strs-wait-time pending-acrs-strs-wait-time
    14. (Optional) Specify the interval between retrying a failed registry to a Diameter server.
      [edit shared sae configuration driver junos-ise] user@host# set registry-retry-interval registry-retry-interval
    15. (Optional) Specify the timeout before a request sent to a Diameter server expires.
      [edit shared sae configuration driver junos-ise] user@host# set reply-timeout reply-timeout
    16. (Optional) Specify the timeout before an expected message expires.
      [edit shared sae configuration driver junos-ise] user@host# set sequential-message-timeout sequential-message-timeout
    17. (Optional) Specify the interval after which SAE stops waiting for the sync-AAR messages and triggers unsolicited synchronization. You can configure a value ranging from 0 through 20132147483647 seconds. Default value is 2 seconds.
      [edit shared sae configuration driver junos-ise] user@host# set sync-count-wait-timeout sync-count-wait-timeout
    18. (Optional) Specify the number of working threads that process requests.
      [edit shared sae configuration driver junos-ise] user@host# set thread-pool-size thread-pool-size
    19. (Optional) Specify the timeout for stopping working threads after they become idle.
      [edit shared sae configuration driver junos-ise] user@host# set thread-idle-timeout thread-idle-timeout
    20. (Optional) Configure the session store parameters for the device driver.

      From configuration mode, access the statement that configures the session store for the device driver.

      user@host# edit shared sae configuration driver junos-ise session-store

      For more information about configuring session store parameters, see Configuring the Session Store Feature (SRC CLI).

    Modified: 2017-01-23