Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
Specifying JunosE Router Initialization Scripts on the SAE (SRC CLI)
Use the following configuration statements to specify router initialization scripts for JunosE routers:
shared sae configuration driver scripts {extension-path extension-path; general general; junose junose; junose-xdr junose-xdr; }
To configure router initialization scripts for JunosE routers:
- From configuration mode, access the configuration statements
that configure router initialization scripts. In this sample procedure,
the scripts are configured in the west-region group. user@host# edit shared sae group west-region configuration driver scripts
- Specify the script for JunosE routers when the JunosE
driver uses COPS-PR mode when connecting to the SAE.[edit shared sae group west-region configuration driver scripts]user@host# set junose junose
- Specify the script for JunosE routers when the JunosE
driver uses COPS-XDR mode when connecting to the SAE.[edit shared sae group west-region configuration driver scripts]user@host# set junose-xdr junose-xdr
In COPS-XDR mode, the router does not send the network access server (NAS) IP address to the SAE. If your configuration requires this value, add the following line to a JunosE script:
import ERXnasip - Configure a router initialization script that can be used
for all types of routers that the SRC module supports.[edit shared sae group west-region configuration driver scripts]user@host# set general general
- Configure a path to router initialization scripts that
are not in the default location, /opt/UMC/sae/lib.[edit shared sae group west-region configuration driver scripts]user@host# set extension-path extension-path
- (Optional) Verify your router initialization script configuration.
[edit shared sae group west-region configuration driver scripts] user@host# show junose-xdr poolPublisher;
