Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Configuring Access to Policy Data (SRC CLI)

    Use the following configuration statements to configure access to policy data:

    shared sae configuration ldap policy-data {policy-dn policy-dn ;parameter-dn parameter-dn ; directory-eventing; polling-interval polling-interval ; }

    To configure SAE access to subscriber data:

    1. From configuration mode, access the configuration statement that configures SAE access to policy data in the directory. In this sample procedure, the policy data is configured in the se-region group.
      user@host# edit shared sae group se-region configuration ldap policy-data
    2. Specify the subtree in the directory in which policy data stored.
      [edit shared sae group se-region configuration ldap policy-data] user@host# set policy-dn policy-dn
    3. Specify the subtree in the directory in which policy parameter data is cached.
      [edit shared sae group se-region configuration ldap policy-data] user@host# set parameter-dn parameter-dn
    4. (Optional) Enable or disable automatic discovery of changes to policy data.
      [edit shared sae group se-region configuration ldap policy-data] user@host# set directory-eventing
    5. Set the frequency for checking the directory for updates.
      [edit shared sae group se-region configuration ldap policy-data] user@host# set polling-interval polling-interval
    6. (Optional) Verify your configuration.
      [edit shared sae group se-region configuration ldap policy-data]
      user@host# show 
      policy-dn o=Policy,<base>;
      parameter-dn o-Parameters,<base>;
      directory-eventing;
      polling-interval 30;

    Modified: 2016-12-29