Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Configuring Destination Networks for PTSP Classify-Traffic Conditions (SRC CLI)

    Use the following configuration statements to add destination networks to a PTSP classify-traffic condition:

    policies group name list name rule name traffic-condition name destination-network network {ip-address ip-address; ip-mask ip-mask; }

    To add a destination network to a PTSP classify-traffic condition:

    1. From configuration mode, enter the destination network within a classify-traffic condition. For example:
      user@host# edit policies group group1 list list1 rule rule1 traffic-condition condition1 destination-network network
    2. (Optional) Specify the IP address of the destination network or host.
      [edit policies group group1 list list1 rule rule1 traffic-condition condition1 destination-network network]user@host# set ip-address ip-address

      Where ip-address is one of the following values:

      • IP address
      • Predefined global parameter:
        • gateway_ipAddress—IP address of the gateway as specified by the service object.
        • interface_ipAddress—IP address of the router interface.
        • service_ipAddress—IP address of the service as specified by the service object.
        • user_ipAddress—IP address of the subscriber.
        • virtual_ipAddress—Virtual portal address of the SAE that is used in redundant redirect server installations.
      • Parameter of type address
    3. (Optional) Configure the IP mask of the destination network or host.
      [edit policies group group1 list list1 rule rule1 traffic-condition condition1 destination-network network]user@host# set ip-mask ip-mask

      Where ip-mask is one of the following values:

      • IP address mask
      • Predefined global parameter:
        • interface_ ipMask—IP mask of the router interface.
        • service_ ipMask—IP mask of the service as specified by the service object.
        • user_ ipMask—IP mask of the subscriber.
      • Parameter of type address.
    4. (Optional) Verify your destination network configuration.
      [edit policies group group1 list list1 rule rule1 traffic-condition condition1 destination-network network]
      user@host# show 
      ip-address interface_ipAddress;
      ip-mask interface_ipMask;
      

    Modified: 2016-12-29