Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Configuring IGMP Conditions (SRC CLI)

    Use the following configuration statements to add IGMP conditions to a classify-traffic condition:

    policies group name list name rule name traffic-condition name igmp-condition {protocol protocol ; protocol-operation protocol-operation ; ip-flags ip-flags; ip-flags-mask ip-flags-mask ; fragment-offset fragment-offset ; packet-length packet-length ; igmp-type igmp-type ; }

    Because the protocol is already set to IGMP, do not change the protocol or protocol-operation options.

    To add IGMP conditions to a classify-traffic condition:

    1. From configuration mode, enter the IGMP configuration. For example:
      user@host# edit policies group junose list pl rule pr traffic-condition ctc igmp-condition
    2. (Optional) Configure the value of the IP flags field in the IP header.
      [edit policies group junose list pl rule pr traffic-condition ctc igmp-condition]user@host# set ip-flags ip-flags
    3. (Optional) Configure the mask that is associated with the IP flag.
      [edit policies group junose list pl rule pr traffic-condition ctc igmp-condition]user@host# set ip-flags-mask ip-flags-mask
    4. (Optional) Configure the value of the fragment offset field.
      [edit policies group junose list pl rule pr traffic-condition ctc igmp-condition]user@host# set fragment-offset fragment-offset
    5. (Optional) Configure the packet length on which to match. The length refers only to the IP packet, including the packet header, and does not include any layer 2 encapsulation overhead.
      [edit policies group junose list pl rule pr traffic-condition ctc igmp-condition]user@host# set packet-length packet-length
    6. (Optional) Configure the IGMP packet type on which to match.
      [edit policies group junose list pl rule pr traffic-condition ctc igmp-condition]user@host# set igmp-type icmp-type
    7. (Optional) Verify the IGMP condition configuration.
      [edit policies group junose list pl rule pr traffic-condition ctc igmp-condition]
      user@host# show 
      protocol igmp;
      protocol-operation 1;
      ip-flags 0;
      ip-flags-mask 0;
      fragment-offset 0;
      igmp-type igmpType;

    Modified: 2016-12-29