Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Configuring NTP Broadcast Mode on a C Series Controller (C-Web Interface)

    To configure NTP to operate in broadcast mode:

    1. Click Configure, expand System, and click NTP.

      The NTP pane appears.

    2. In the Create new list, select Broadcast. Type an IP address or a hostname on one of the local networks or a multicast address assigned to NTP. Click OK.
    3. Enter information as described in the Help text in the main pane, and click Apply.

      Note: If the remote system has authentication enabled, specify an authentication key and value. The system transmits the specified authentication key when transmitting packets.

    Modified: 2016-12-29