Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
Configuring Subscriber IP Pools as IP Subnets (C-Web Interface)
To configure subscriber IP pools that are managed by the CMTS device as IP subnets:
- Click Configure, expand Slot>Slot: 0>JPS, and then click CMTS
Registry.
The CMTS Registry pane appears.
- From the Create new list, select CMTS.
- In the dialog box, type an IPv4 or IPv6 address for the
new CMTS, and click OK.
The CMTS:<ip address> pane appears.
- From the Create new list, select Subnet Pool.
- In the dialog box, enter a network IP address/mask for
the new Subnet Pool, and click OK.
The Subnet Pool: <ip address/mask> pane appears.
- Enter the information in the main pane as described in the Help text, and click Apply.
