Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Configuring the Hostname When Running the Juniper Networks Database in Community Mode (SRC CLI)

    If you run Juniper Networks databases in community mode, all C Series Controllers that have a Juniper Networks database configured to be part of a community require hostname configuration.

    You can either configure Domain Name System (DNS) and enter the controller names into DNS or configure the controller names as static hostnames in all C Series Controllers.

    To configure each C Series Controller to use DNS:

    1. Navigate to the [edit system] hierarchy level.
      [edit]user@host# edit system
    2. Specify the name of a name server.
      [edit system]user@host# set name-server name-server

      where name-server is the IP address of a DNS name server.

    To configure static hostnames for each C Series Controller:

    1. Navigate to the [edit system] hierarchy level.
      [edit]user@host# edit system
    2. Specify the name of a C Series Controller as the static hostname.
      [edit system]user@host# set static-host-mapping host-name

      where host-name is the fully qualified name.

    Modified: 2016-12-29