Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Specifying Initialization Scripts for DMI-Enabled Routers Running Junos OS (SRC CLI)

    Use the following configuration statements to specify initialization scripts for DMI-enabled routers running Junos OS:

    shared sae configuration driver scripts {extension-path extension-path;general general; junos-dmi junos-dmi;}

    To configure initialization scripts for DMI-enabled routers running Junos OS:

    1. From configuration mode, access the configuration statements that configure initialization scripts. In this sample procedure, the scripts are configured in the west-region group.
      user@host# edit shared sae group west-region configuration driver scripts
    2. Specify the initialization script for DMI-enabled routers running Junos OS.
      [edit shared sae group west-region configuration driver scripts]user@host# set junos-dmi junos-dmi

      SAE runs the specified script when the connection between a DMI-enabled router and the SAE is established and again when the connection is dropped.

    3. Configure the initialization script that can be used for all other types of routers supported by the SRC module.
      [edit shared sae group west-region configuration driver scripts]user@host# set general general
    4. Configure a path to initialization scripts that are not in the default location, /opt/UMC/sae/lib.
      [edit shared sae group west-region configuration driver scripts]user@host# set extension-path extension-path
    5. (Optional) From operational mode, verify your initialization script configuration.
      [edit shared sae group west-region configuration driver scripts]
      user@host# show
      junos-dmi iorPublisher;

    Modified: 2016-12-29