Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    SRC Aggregate Services Overview

    Combining services lets the SRC software treat the services within an aggregate service as a unit. When an aggregate service becomes active, it tries to activate all the services within it.

    An aggregate service can distribute the activation of a number of services within the aggregate across one or more SAEs in an SRC network. This specialized service is ideal for supporting voice over IP (VoIP) and video on demand. To deliver these types of features to subscribers, you can configure bidirectional or unidirectional quality of service (QoS) services based on policies provisioned across a number of interfaces on one or more SAE-managed network devices in an SRC network. Figure 1 shows a sample aggregate service that provides end-to-end QoS for video on demand, with QoS service 1 and QoS service 2 activated on Juniper Networks routers in the path between the video server and the subscriber.

    Figure 1: Sample Configuration of an Aggregate Service

    Sample Configuration of an Aggregate
Service

    The services included in an aggregate service manage policies in the usual manner. The aggregate service does not directly manage any policies on a network device.

    Fragment Services

    The services that make up an aggregate service are referred to as fragment services. This term provides a way to distinguish between services that are included in an aggregate service and those that are not. The fragment services can be any type of service that the SAE supports, except another aggregate service.

    Subscriber Reference Expressions for Fragment Services

    The configuration for each fragment service includes a subscriber reference expression, a phrase that identifies the subscriber sessions that activate the fragment service. The subscriber reference expression defines the subscriber session by subscriber IP address, assigned IP address, distinguished name (DN), interface name, login name, or associated virtual router.

    To use aggregate services requires that the network information collector (NIC) be configured. Use a configuration scenario that provides a key for the type of subscriber reference expression defined for the fragment service. For example, if the subscriber reference expression is a DN, the NIC key is also a DN. In this case, you could use the NIC configuration scenario OnePopDnSharedIp, which uses a DN as a key.

    For more information about the NIC configuration scenarios and the types of resolutions performed by these scenarios, see NIC Configuration Scenarios.

    Mandatory Services

    A fragment service that must be active for an aggregate service to become active is called a mandatory service. When you configure an aggregate service, you specify which services, if any, are mandatory. For example, you could specify that rate-limiting services for a video-on-demand connection be mandatory to ensure call quality.

    Redundant Services

    When you configure an aggregate service, you can configure fragment services to provide redundancy for each other. Fragment services that share the same redundancy group name provide redundancy.

    For an aggregate service to become active, at least one fragment service from each redundancy group must become active. For example, if you configure two services, S1 and S2, and assign the same redundancy group name to each of these services, S1 and S2 provide redundancy for each other if one becomes disabled.

    While an aggregate service is active, the SAE tries to keep all fragment services within it active. An aggregate service and any of its active fragment services become inactive if a mandatory fragment service or an entire redundancy group becomes inactive.

    Aggregate Service Sessions

    An aggregate service session coordinates the activation of the services within it. It runs on the same SAE where it starts. The aggregate service session is created in the router driver that hosts the subscriber session that starts the service. An individual service session for a fragment service can be activated in the same SAE or another SAE on the SRC network.

    Understanding how aggregate service sessions are managed can help you troubleshoot service activation or service deactivation issues that might arise. The SRC software provides a set of configurable timers that helps control session management.

    For information about the timers that you can use to troubleshoot aggregate services, see Configuring Timers for Aggregate Services (SRC CLI).

    While activating an aggregate service session, you can specify different activation attributes. Some of these attributes are propagated to the fragments of the aggregate service session.

    Session Activation

    An aggregate service becomes active when:

    • All mandatory services are active.

      If a mandatory service does not start, the SAE deactivates any fragment services that are active.

    • If there are no mandatory services, the aggregate service is still active and trying to activate fragment services.

    If any fragment services that are not mandatory services do not become active, the aggregate service continues to try to start them. How long the aggregate service tries to activate fragment services depends on the settings for activation-deactivation time.

    When an aggregate service becomes active, it monitors the services that are part of the aggregate service.

    Note: Depending on your implementation, accounting software could detect that a fragment service session became active even though the associated aggregate service did not become active, resulting in the fragment services being deactivated.

    You can configure your accounting software to ignore the activation of the fragment session when an aggregate service session fails. This way, a customer is not billed for an aggregate service that was not received.

    Attributes Used to Activate an Aggregate Service Session

    The following attributes are propagated from an aggregate service session to its fragments:

    • aggregateServiceName
    • aggregateSessionName
    • aggregateVr
    • aggregateLoginName
    • aggregateUserIdType
    • aggregateUserDn
    • aggregateUserIp
    • aggregateSessionId
    • aggregateAccountingId
    • aggregateAuthUserId
    • requireAggregateSubscription
    • aggregateFragmentIsLocal
    • aggregateFragmentSessionId
    • aggregateUserSessionId
    • upStreamBandwidth
    • downStreamBandwidth
    • interimTime
    • properties
    • sessionVolumeQuota
    • sessionTag
    • substitutions

      Note: When a fragment session is activated from an aggregate service session, the substitutions attribute has the following behaviors:

      • The substitutions attribute is used when an aggregate session is activated.
      • The substitutions attribute is defined in the fragment service. You can define a list of substitution names. The values are acquired from an acquisition path.

    The following attributes are not propagated from an aggregate service session to its fragments:

    • acctSessionId
    • sessionTimeout
    • subscriptionUsername
    • subscriptionPassword

    Session Deactivation

    When the SAE deactivates an aggregate service, the aggregate service session tries to deactivate the services within it. The SAE deactivates an aggregate service when all fragment services stop. If one of these services remains active, the aggregate service stays in memory until the service session ends. The SAE periodically tries to stop the active fragment session until the maximum retry time is reached, at which time it deactivates the aggregate service. As a result, the aggregate service session can remain in memory after the associated subscriber session ends.

    Session Modification

    The aggregate service session propagates the following modified attributes to the fragments:

    • substitutions
    • upStreamBandwidth
    • downStreamBandwidth
    • interimTime
    • properties
    • sessionVolumeQuota
    • sessionTag

    The modify service session does not support the modification of substitutions used in the subscriber reference expression, which results in the activation and deactivation of the fragments.

    The aggregate service session triggers the modify functionality to its fragments. When you publish an authentication event, you can deny the modification for the fragment. This leads the modify functionality to split into the following steps:

    • The aggregate service session must receive an approval from all the fragments when you publish the service authentication event.
    • The specified modify functionality is performed. For example, for a policy service session, provisioning objects are updated. This step occurs only if an aggregate service session received an approval from all the fragments in the previous step.

    Session Monitoring

    An aggregate service session exchanges keepalive messages with a session management process for remote fragment services. This way, if a service session is removed from a router while the SAE is not managing the router, such as when the Common Open Policy Service (COPS) client stops on a router running JunosE Software or the configuration database is reset on a router running Junos OS, the SAE associated with the router receives notification that the keepalive message failed.

    Service Activation

    Aggregate services are activated in a way similar to any other service, but with the additional requirement of activating the associated fragment services. Figure 2 shows a sample service activation for a video-on-demand service.

    Figure 2: Aggregate Service Activation

    Aggregate Service Activation

    The following process describes the service activation for a video-on-demand service, with Steps 1–4 illustrated in Figure 2.

    1. A subscriber requests a video-on-demand service through a residential portal.
    2. The residential portal requests the service through the SAE.
    3. The SAE activates a subscription for the associated aggregate service, and a session for the aggregate service becomes active.
    4. The aggregate service coordinates with the SAE, and the SAE tries to activate the fragment services that have been configured for the aggregate service.

    The aggregate service becomes active when:

    • All mandatory services are active.
    • If there are no mandatory services, at least one fragment service is active.
    • For redundant fragment services, at least one fragment service configured for a redundancy group becomes active.

    The aggregate service initiates accounting, if accounting has been configured.

    After the aggregate service becomes active, it monitors fragment services to ensure that they are still active. When the subscriber or the video server ends the video-on-demand session, the aggregate service tries to terminate active fragment services.

    Modified: 2016-12-29