Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation  Back up to About Overview 
  
[+] Expand All
[-] Collapse All

Related Documentation

  • NAT Address Management Portal Overview
  • Assigning IP Addresses

Before You Add a Junos OS VPN to the SRC Configuration

For SRC configurations that support routers running Junos OS, you can add VPNs and extranets for retailers and enterprises.

For C Series Controllers, you add VPNs through the CLI and can manage the VPNs through an enterprise portal that runs on another system.

Before you can add a VPN to an SRC configuration, you must configure the VPN. Before you configure the VPN, make sure that in the routing scheme in the VPN:

  • All members in the VPN can reach other.
  • No changes are needed as members are added to and removed from the VPN.

If a VPN is used as an intranet, you can ensure that the routing scheme meets these requirements by configuring either:

  • Static routes in the VPN
  • Appropriate routing protocols

If the VPN is exported as an extranet, some members of the VPN may use private or conflicting address schemes. In addition, if the VPN has a large number of potential members, configuring static routing or routing protocols for all potential members may not be a manageable proposition. In these last two cases, we recommend that you use public addresses in the VPN and have VPN members implement Network Address translation (NAT) for traffic destined for the VPN.

VPNs use private IP addresses. If, however, enterprises that you administer export VPNs to extranet clients, you must ensure that the extranet clients can reach the IP addresses that the VPNs use. To implement an address scheme that allows all subscribers who have access to a VPN, we recommend that you implement NAT on the device running Junos OS. IT managers in the retailers and enterprises who own the VPNs can then map private IP addresses in the VPNs to public IP addresses, which extranet clients can reach.

Before you can reference a Junos OS VPN from the SRC configuration:

  1. Create one routing instance in each router where VPN members access the VPN.
  2. Make sure that each routing instance in the VPN has the same name as the VPN. The VPN represents the collection of the routing instances, the VPN members, and the connections between those routing instances within the VPN. All routing instances share a VPN ID, which you use to add VPNs to an SRC configuration.
  3. Connect the VPN through a tunnel such as an MPLS label-switched path or IP Security tunnel.

Related Documentation

  • NAT Address Management Portal Overview
  • Assigning IP Addresses

Modified: 2017-08-03