Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation  Back up to About Overview 

Release Highlights

Highlights include the following product enhancements:

Note: The SRC software runs as VMs and runs on C Series Controllers—a range of hardware platforms. The SRC 4.11.0 software contains the features found in the SRC 4.10.0 release plus the features listed in this section. The SRC 4.11.0 software may contain references to the service activation engine (SAE) Release version 7.17.0. SRC 4.11.0 software does not run on the discontinued C2000 and C4000 controllers because of hardware incompatibility.

Junos-ise Dual-Stack Support

Dual-stack support for JSRC allows handling of both IPv4 and IPv6 families on a single subscriber session with the following features:

  • Supports activations and deactivations of individual families. IP addresses are updated on the single user session accordingly.
  • Provides separate or aggregate accounting support for each family or both families correspondingly.
  • Supports backward compatibility with the older MX versions that do not support dual-stack.

    Note: We recommend having dynamic-profiles with both inet and inet6 families.

Note: The SRC software pushes the dynamic-profile name to MX Series router. MX Series router maintains the policy for inet and inet6 families separately and activates or deactivates the policy for the corresponding family.

Note: There is no separate provisioning for the second family activation.

Modified: 2017-08-07